Journal Publications

  1. J Ou, F Wang, W Li, M Yan, A. Amirfazli, “Methyltrimethoxysilane as a multipurpose chemical for durable superhydrophobic cotton fabric”, Prog. Organic Coatings 146, 105700, 2020.
  2. S. Buksh, M. Marengo, A. Amirfazli,”Comparison of droplet impact onto a moving surface and an inclined surface”, Atomization Spray, (Accepted 2020).
  3. F. Barghi, M. Entezari, S. F. Chini, A. Amirfazli, “Effect of Initial Wetting State on Plastron Recovery through Heating”, Int. J. Heat Mass Trans. (Accepted 2020).
  4. A. Baldelli, J. Ou, D. Barona, W Li and A Amirfazli, “Sprayable, Superhydrophobic, Electrically and Thermally Conductive Coating”, Adv. Mat. Interfaces –  1902110 (1-9), 2020 (Invited Paper)
  5. S.A. Banitabaei and A. Amirfazli, “Droplet impact onto a solid sphere in mid-air: Effect of viscosity, gas density, and diameter ratio on impact outcomes”, Phys. Fluids, 32, 037102 2020.
    6.
  6. A. Baldelli, B. Bshaden, A. Amirfazli, D. Sameoto, “Reproducibility of Superhydrophobic and Oleophobic Polymeric Micro Surface Topographies”, Surf. Topogr. Metrol. Prop. (Accepted 2020).
  7. S. Cook et al., “Perspectives on Interdisciplinarity from Members of the Canadian College of New Scholars, Artists, and Scientists”, Facets (Accepted 2019).
  8. J. Ou, G. Fang, W. Li, Wen, A. Amirfazli, “Wetting Transition on Textured Surfaces: A Thermodynamic Approach”, J Phys. Chem C, 23, 23976−23986, 2019 (Cover).
  9. H. Chen, M. Marengo, A. Amirfazli, “Drop impact onto semi-infinite solid surfaces with different wettabilities”,  Phys. Rev. Fluids,  4, 083601, pp 1-18, 2019
  10. Y. Ibrahim, R. Kempers, A. Amirfazli, “3D Printed Electro-Thermal Anti- or De-Icing System for Composite Panels”, Cold Regions Sci. Technol., 166, 102844, pp1-10, 2019.
  11. H. Chen, X. Zhang, B. Defez Garcia, A. Georgoula, M. Deflorin, Q. Liu, M. Marengo, Z. Xu, A. Amirfazli, “Drop impact onto a cantilever beam: behaviour of the lamella and force measurement”, Interfacial Phenomena Heat Transfer, 7, 85-96, 2019.
  12. H. Almohammadi, A. Amirfazli, “Droplet impact: Viscosity and wettability effects on splashing”, J. Colloid Interface Sci., 553, 22–30, 2019.
  13. S. Buksh, H. Almohammadi, M. Marengo, A. Amirfazli, “Spreading of low viscous liquids on a stationary and a moving surface”, Exp. Fluids, 60, 76, 2019.
  14. A. Razzaghi, A. Amirfazli, “Shedding of a Pair of Sessile Droplets”, Int. J. Multiphase Flow, 110, 59-68, 2019.
  15. A. Razzaghi, S. A. Banitabaei, A. Amirfazli, “Shedding of Multiple Sessile Droplets by an Airflow”, Phys. Fluids 30, 087104, 2018.
  16. H. Almohammadi, A. Amirfazli, “Sessile drop evaporation under an electric field”, Colloids & Surfaces A, 555, 580-585, 2018.
  17. H. Chen, J. L. Muros-Cobos, A. Amirfazli, “Contact angle measurement with a smartphone”, Rev. Sci. Instruments, 89, 035117, 2018.
  18. Miskovic, S. Traettino, C. Minetti, H. Machrafi, A. Amirfazli, F. Dubois, C. Iorio, “Fabrication and Characterization of Polystyrene Colloidal Photonic Crystals on Soft Sodium Alginate Film”, J. Nanoelectronics Optoelectronics, 13, 472-478, 2018.
  19. M. Ataei, H. Chen, A. Amirfazli, “Behavior of a Liquid Bridge between Nonparallel Hydrophobic Surfaces”, Langmuir, 33, 14674–14683, 2017.
  20. N. Chen, H. Chen, A. Amirfazli, “Drop Impact onto a Thin Film: Miscibility Effect”, Phys. Fluids, 29, 092106, 2017.
  21. H. Chen, J. L. Muros-Cobos, J. A. Holgado-Terriza, A. Amirfazli., “Surface Tension Measurement with a Smartphone using a Pendant Drop”, Colloids & Surfaces A, 533, 213-217, 2017.
  22. S. A. Banitabaei, A. Amirfazli,”Droplet impact onto a solid sphere: effect of wettability and impact velocity”, Phys. Fluids, 29, 06211, 2017.
  23. H. Almohammadi, A. Amirfazli,  “Asymmetric Spreading of a Drop upon Impact onto a Surface”, Langmuir, 33, 5957–5964 2017.
  24. A. Seyedmehdi, R. Vrckovnik, A. Amirfazli, “Robust Superhydrophobic Coatings from Modified Siloxane Resin”, Surface Innovations, 5, 203-210, 2017.
  25. V. Grishaev, C.S. Iorio, F. Dubois, A. Amirfazli, “Impact of particle-laden drops: splashing criterion”, Atomization Spray, 17, 1-12, 2017.
  26. A. Marmur, C. Della Volpe, S. Siboni, A. Amirfazli, J.W. Drelich, “Contact Angles and Wettability: Towards Common and Accurate Terminology”, Surface Innovations, 5, 3-8, 2017.
  27. H. Almohammadi, A. Amirfazli, “Understanding the drop impact onto moving hydrophilic and hydrophobic surfaces”, Soft Matter, 13, 2040-2053, 2017.
  28. H. Chen, N. Tabatabaei, A. Amirfazli, “Liquid bridge as a tunable-focus cylindrical liquid lens”, Appl. Phys. Lett, 110, 041608, 2017.
  29. M. Ataei, H. Chen, T. Tang, A. Amirfazli, “Stability of a Liquid Bridgebetween Nonparallel Hydrophilic Surfaces”, J. Colloid Interface Sci., 492, 207-217, 2017.
  30. M. Ataei, T. Tang, A. Amirfazli, “Motion of a Liquid Bridge between Nonparallel Surfaces”, J. Colloid Interface Sci., 492, 218-228, 2017.
  31. V. Grishaev, C.S. Iorio, F. Dubois, A. Amirfazli, “Impact of particle-laden drops: particle distribution on the substrate”, J. Colloid Interface Sci., 490, 108-118, 2017.
  32. S.F. Chini, A. Amirfazli, “Resolving an Ostensible Inconsistency in Calculating the Evaporation Rate of Sessile Drops”, Adv. Colloid Interface Sci. 243, 121-128, 2017.
  33. V. Sechenyh, A. Amirfazli, “An experimental study for impact of a drop onto a particle in mid-air: The influence of particle wettability”,  J. Fluids Structures,  66, 282–292, 2016.
  34. M. Moore, A. Amirfazli, S.F. Chini, “Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach”, J. Comput. App Mech., 47, 109-119, 2016.
  35. F. J. Montes Ruiz-Cabello, A. Amirfazli, M. Cabrerizo-Vílchez, M.A. Rodríguez-Valverde, “Fabrication of Water-Repellent Surfaces on Galvanized Steel”, RSC Advances, 6, 71970-71976, 2016.
  36. S. A. Banitabaei, A. Amirfazli, “Pneumatic drop generator: Liquid pinch-off and velocity of single droplets”, Colloids Surfaces A, 505, 204-213, 2016.
  37. H. Chen, T. Tang, H. Zhao, K-Y Law, A. Amirfazli, “How pinning and contact angle hysteresis governs quasi-static liquid drop transfer”, Soft Matter, 12, 1998-2008, 2016.
  38. H Chen, T. Tang, A. Amirfazli,”Effects of Surface Wettability on Fast Liquid Transfer”, Phys. Fluids, 27, 112102, 2015.
  39. H Chen, T. Tang, A. Amirfazli,”Fast Liquid Transfer between Surfaces: Breakup of Stretched Liquid Bridges”, Langmuir, 42, 11470-11476, 2015.
  40. D.K. Mandal, A. Criscione, C. Tropea, A. Amirfazli, “Shedding of water drops from a surface under icing conditions”, Langmuir, 31, 9340–9347, 2015.
  41. V. Grishaev, C.S. Iorio, F. Dubois, A. Amirfazli, “Complex Drop Impact Morphology”, Langmuir, 31, 9833–9844, 2015.
  42. I.V. Roisman, A. Criscione, C Tropea, D.K. Mandal, A. Amirfazli, “Dislodging a sessile drop by a high-Reynolds-number shear flow at subfreezing temperatures”, Phys. Rev. E, 92, 023007, 2015.
  43. D. Mangini, C.Antonini, M. Marengo, A. Amirfazli, “Runback ice formation mechanism on hydrophilic and superhydrophobic surfaces”, Cold Regions Sci. Technol., 109, 53-60, 2015.
  44. H Chen, T. Tang, A. Amirfazli, “Effect of contact angle hysteresis on breakage of a liquid bridge”, Eur. Phys. J. Special Topics, 224, 277–288, 2015.
  45. A.J.B. Milne, J. A.W. Elliott, A. Amirfazli, “Contact Angles of Surfactant Solutions on Heterogeneous Surfaces”, Phys. Chem. Chem. Phys., 17, 5493-6136, 2015     (Front Cover of the issue).
  46. B.M. Koch, A. Amirfazli, J.A.W. Elliott, “Wetting of Rough Surfaces by a Low Surface Tension Liquid”, J  Phys. Chem. C,  118, 23777-23782, 2014.
  47. B.M. Koch, A. Amirfazli, J.A.W. Elliott, “Modeling and measurement of contact angle hysteresis on textured high-contact-angle surfaces”, J  Phys. Chem. C, 118, 18554–18563,  2014.
  48. G. Fang, A. Amirfazli, “Investigation of Wetting Behavior on Patterned Surfaces with Different Microgeometries”, Interfacial Phenomena Heat Transfer, 2, 155–180, 2014.
  49. B.M. Koch, J.A.W. Elliott, A. Amirfazli, “Study of Model Superoleophobic Surfaces Fabricated with a Modified Bosch Etch Method”, Langmuir, 30, 14039-14047, 2014.
  50. H. Chen, T. Tang, A. Amirfazli, “Mechanism of liquid transfer between two surfaces and the role of contact angles”, Soft Matter, 10, 2503-2507, 2014.
  51. G. Fang, A. Amirfazli, “Understanding the Anti-icing Behavior of Superhydrophobic Surfaces”, Surface Innovations, 2, 94-102, 2014.
  52. S. Tarquini, C. Antonini, M. Marengo, A. Amirfazli, J. Palacios, “Investigation of Ice Shedding Properties of Superhydrophobic Coatings on Helicopter Blades”, Cold Regions Sci. Technol. 100, 50-58, 2014.
  53. S. Madani, A. Amirfazli, “Oil drop shedding from solid substrates by a shearing liquid”, Colloid Surfaces A, 441, 796-806, 2014.
  54. A.J.B. Milne, B. Defez Garcia, M.A. Cabrerizo-Vílchez, A. Amirfazli, “Understanding (sessile/constrained) bubble and drop oscillations”, Adv. Colloid Interface Sci., 203, 22-36, 2014.
  55. C. Antonini, F. Villa, I.  Bernagozzi, A. Amirfazli, M. Marengo, “Drop rebound after impact: the role of receding contact angle” Langmuir, 29, 16045–16050, 2013. (Cover page of Dec. issue)
  56. S. F. Chini, V. Bertola, A. Amirfazli, “A methodology to determine the adhesion forces of arbitrarily shaped drops with convex contact angles”, Colloid Surfaces A, 436, 425-433, 2013.
  57. S. F. Chini, A. Amirfazli, “Understanding the evaporation of spherical drops in quiescent environment”, Colloid Surfaces A, 432, 82-88, 2013.
  58. H Chen, A. Amirfazli, T. Tang, “Modeling Liquid Bridge between Surfaces with Contact Angle Hysteresis”, Langmuir, 29, 3310-3319, 2013.
  59. M. Mohseni, A. Amirfazli, “A Novel Electro-thermal Anti-icing System for Fiber-reinforced Polymer Composite Airfoils”, Cold Regions Sci. Technol. 87, 47–58, 2013.
  60. V. Grishaev, A. Amirfazli, S. Chikov, Y. Lyulin, O. Kabov, “Study of edge effect to stop liquid spillage for microgravity application”, J. Microgravity – Sci. Technol., 25, 27-33, 2013.
  61. A.J.B. Milne, A. Amirfazli, “The Cassie Equation: How it is Meant to be Used”, Adv. Colloid Interface Sci. 170, 48-55, 2012.
  62. C. Antonini, A. Amirfazli, M. Marengo “Drop impact and wettability: from hydrophilic to superhydrophobic surfaces”, Phys. Fluids, 24, 102104, 2012. (Cover page for Oct 2012 issue. Most accessed paper in 2012)
  63. M. Mohseni, M Frioult, A Amirfazli, “Simultaneous monitoring of ice accretion and thermography of an airfoil: an IR imaging methodology”, Meas. Sci. Technol., 23,105405 (12pp), 2012
  64. S.Mangili, C. Antonini, M. Marengo, A. Amirfazli, “Understanding the drop impact phenomenon on soft PDMS substrates”, Soft Matter 8, 10045-10054, 2012.
  65. S. F. Chini, A. Amirfazli, “Collapse of Patterns with Various Geometries during Drying in Photolithography: A Numerical Study”, J Micro/Nanolithography, MEMS, MOEMS (JM3), 11(3), 033003, 2012.
  66. G. Fang, A. Amirfazli, “Understanding the Edge Effect in Wetting: A Thermodynamic Approach”, Langmuir, 28, 9421-9430, 2012.
  67. H. Chen, T. Tang, A. Amirfazli, “Fabrication of Polymeric Surfaces with Similar Contact Angles but Dissimilar Contact Angle Hysteresis”, Colloid Surfaces A408, 17-21, 2012.
  68. A.G. Au, A. Amirfazli, “The path to developing realistic long bone models” Int. J. Exp. Comput. Biomechanics, 2, 30 – 60, 2012.
  69. S.F. Chini, A. Amirfazli, “A method for measuring contact angle of asymmetric and symmetric drops”, Colloids Surfaces A, 388, 29-37, 2011.
  70. A.J.B. Milne, J.A.W. Elliott, P. Zabeti, J. Zhou, A. Amirfazli, “Model and experimental studies for contact angles of surfactant solution on rough and smooth hydrophobic surfaces” , Phys. Chem. Chem. Phys. 13, 16208-16219,  2011.
  71. C. Antonini, M. Innocenti, T. Horn, M. Marengo, A. Amirfazli, “Understanding the Effect of Superhydrophobic Coatings on Energy Reduction in Anti-Icing Systems”, Cold Regions Sci. Technol., 67, 58-67, 2011. (Most downloaded designation 2012, 2013, 2014, and 2015)
  72. D. Barona and A. Amirfazli, “Producing a Superhydrophobic Paper and Altering its Wetting Properties Using Ink-jet Printing” Lab Chip, 11, 936-940, 2011.
  73. M. Trump, D.M. Palathinkal, L. Beaupre, D. Otto, P. Leung, A. Amirfazli, “In vitro biomechanical testing of anterior cruciate ligament reconstruction: traditional versus physiologically relevant load analysis”, Knee, 18, 193-201, 2011.
  74. M. Y. Zhuo, M.R. Shadnam, A. Amirfazli “Direct Laser Patterning of Self-assembled Monolayer Using Elliptical Laser Beams: A Theoretical Parametric Study”, Optics & Laser Technol., 43, 1377-1384, 2011.
  75. J. Ally, M. Kappl, H-J Butt, A. Amirfazli, “Detachment force of particles from air-liquid interfaces of films and bubbles”, Langmuir, 26, 18135-18143, 2010.
  76. J. Ally, A. Amirfazli, “The status of magnetic aerosol drug targeting in the lung”, J. Phys. Conf. Series, 1311, 307-316, 2010.
  77.  M.A. Rahman, C.E. Ejim, A. Amirfazli, B.A. Fleck, “Experimental investigation of geometric scaling on Atomization in a two-phase gas/liquid spray”, Multiphase Sci. Technol, 22, 133-155, 2010.
  78. J. Ally, A. Amirfazli, “Magnetophoretic measurement of the drag force on microparticles at air-liquid interfaces”, Colloids and Surfaces A, 360, 120-128, 2010.
  79. S.F. Chini, A. Amirfazli, “Understanding pattern collapse in photolithography process due to capillary forces”, Langmuir, 26, 13707-13714, 2010.
  80. J. Ally, E. Vittorias, A. Amirfazli, M.l Kappl, E. Bonaccurso, C.E. McNamee, H-J Butt,“Interaction of a particle with a liquid film on a solid surface”, Langmuir, 26, 11797–11803, 2010.
  81. J.L. Dressler, R.T. Ng, A. Amirfazli, J.P. Carey, “Development and Evaluation of a Multi-Axis Biomechanical Testing Apparatus for Knee” Int. J. Exp. Comput. Biomechanics, 1, 271-295, 2010.
  82. A. J. B. Milne, A. Amirfazli, “Autophilic effect: Wetting of hydrophobic surfaces by surfactant solutions”, Langmuir, 26, 4668-4674, 2010.
  83. C.E. Ejim, M.A. Rahman, A. Amirfazli, B.A. Fleck, “Effects of liquid viscosity and surface tension on atomization in two-phase, gas/liquid fluid coker nozzles”, Fuel, 89, 1872-1882, 2010.
  84. A. G. Au, A. B. Liggins, V. J. Raso, J. Carey, A. Amirfazli “Representation of bone heterogeneity in subject-specific finite element models for knee”, Comput. Methods Programs Biomed., 99, 154-171, 2010.
  85. J.L. Dressler, A.G. Au, J.P. Carey, A. Amirfazli, “Subject-Specific Finite Element Model of Knee: Experimental Validation using Composite and Bovine Specimens”, Int. J. Exp. Comput. Biomechanics, 1, 146-171, 2009.
  86. A.J.B. Milne and A. Amirfazli, “Drop shedding by shear flow for hydrophilic to superhydrophobic surfaces”, Langmuir, 25, 14155–14164, 2009.
  87. C. Antonini, J. Carmona, E. Pierce, M. Marengo, A. Amirfazli, “A general methodology for evaluating the adhesion force of drops and bubbles on solid surfaces”, Langmuir, 25, 6143–6154, 2009.
  88. A.G. Au; D. Palathinkal; A.B. Liggins; V.J. Raso; J. Carey; R. G. Lambert; A. Amirfazli, “A NURBS-based technique for subject-specific construction of knee bone geometry”, Comput. Methods Programs Biomed, 92, 20-34, 2008.
  89. W. Li, A. Amirfazli, “Hierarchical structures for natural superhydrophobic surfaces”, Soft Matter, 4, 462 – 466, 2008.
  90. J. Ally, W. Roa, A. Amirfazli, “Use of mucolytics to enhance magnetic particle retention at a model airway surface”, J. Magn. Magn. Mater., 20, 1834-1843, 2008.
  91. M. B. Khamesee, M. Rapolti, A. Amirfazli, “Controller Design and Optimization for Large-Delays Image Processing in Visual Closed-Loop Systems”, Mechatronics, 18, 251–261, 2008.
  92. M.R. Shadnam, A. Amirfazli, “Analysis of patterning nanometer thin organic monolayers by a laser: curvilinear paths and junctions”, J. Comput. Theor. Nanosci. 5, 1–6, 2008.
  93. S. Maldonado, B. Fleck , T. Heidrick, A. Amirfazli, E.W. Chan, B. Knapper, “Development of an Experimental Method to Evaluate Stability of Gas-Liquid Sprays”, Atomization & Spray, 18, 699-722, 2008.
  94. S. Meyyappan, M.R. Shadnam, A. Amirfazli, “Fabrication of Surface Energy/Chemical Gradients Using Self Assembled Monolayer Surfaces”, Langmuir, 24, 2892-2899, 2008.
  95. P.J. Ramón-Torregrosa, M A. Rodríguez-Valverde, A. Amirfazli, M.A. Cabrerizo-Vílchez “Factors affecting the measurement of roughness factor of surfaces and its implications for wetting studies” Colloid Surfaces A, 323, 83-93, 2008.
  96. E. Pierce, F. J. Carmona, A. Amirfazli, “Understanding of Sliding and Contact Angle Results in Tilted Plate Experiments”, Colloids Surfaces A, 323, 73-82, 2008.
  97. W. Li, A. Amirfazli “Superhydrophobic Surfaces: Adhere Strongly to Water?”, Adv. Mater., 19, 3421-3422, 2007.
  98. A. Amirfazli, “Magnetic Nanoparticles Hit the Target”, Nature (Nanotechnol.), 2, pp 467 – 468, 2007.
  99. J. R. Saunders, D. Benfield, W. Moussa, and A. Amirfazli, “Micro and Nanotechnology’s Influence on the Future of Renewable Energies”, Int. J. Green Energy, 4, 483–503, 2007.
  100. W. Li, A. Amirfazli, “Design of microtextured superhydrophobic surfaces: a thermodynamic analysis”, Adv. Colloid Interface Sci., 132, 51-68, 2007.
  101. C.E. Ejim, B.A. Fleck, A. Amirfazli, “Analytical Study for Atomization of Biodiesels and Their Blends in a Typical Injector: Surface Tension and Viscosity Effects”, Fuel, 86, 1534-1544, 2007.
  102. A. Au, V. J. Raso, A. B. Liggins and A. Amirfazli, “Contribution of loading conditions and material properties to stress shielding in tibial component of total knee replacements”, J. Biomech, 40, 1410-1416, 2007.
  103. S.E. Kirkwood, M.R. Shadnam, A. Amirfazli, R. Fedosejevs, “Mechanism for femtosecond laser pulse patterning of self-assembled monolayers on gold-coated substrates”, J. Phys. Conf. Series, 59, 428–431, 2007.
  104. A. Bateni, A. Amirfazli, A.W. Neumann, “Effects of an Electric Field on the Surface Tension of Conducting Drops”, Colloids Surfaces A, 289, 25-38, 2006.
  105. H. Tavana, A. Amirfazli, A.W. Neumann, “Fabrication of Superhydrophobic Surfaces of n-Hexatriacontane”, Langmuir, 22, 5556-5559, 2006.
  106. J. Ally, A. Amirfazli, W. Roa, “Factors Affecting Magnetic Retention of Particles in the Upper Airways: an in vitro and ex vivo Study”, J. Aerosol Medicine, 19, 491-509, 2006.
  107. A. Ababneh, A. Amirfazli, J.W. Elliott, “Effect of Gravity on Macroscopic Advancing Contact Angle of Sessile Drops”, Canadian J. Chem. Eng., 84, 39-43, 2006.
  108. M. B. Khamesee, J. Ally, A. Amirfazli, “Automatic Focusing for Objects with Large Displacement at High Magnification”, Measurement + Control, 39, 118-121, 2006.
  109. M. R. Shadnam, A. Amirfazli, “Kinetics of Alkanethiol Monolayer Desorption from Gold in Air”, Chem. Comm. 38, 4869-4871, 2005.
  110. W. Li and A. Amirfazli “A thermodynamic approach for determining the contact angle hysteresis for superhydrophobic surfaces”, J. Colloid Surface Sci., 292, 195-201, 2005. TOP25 Hottest articles.
  111. Bateni, A. Ababneh, J.W. Elliott, A.W. Neumann, A. Amirfazli, “Effect of gravity and electric field on shape and surface tension of drops”, Adv. Space Res., 36, 64-69 2005.
  112. M.R. Shadnam, S. Kirkwood, R. Fedosejevs, A. Amirfazli, “Thermo-Kinetics Study of Laser Induced Desorption of Self Assembled Monolayer from Gold: Case of Laser Micropatterning”, J. Phys. Chem B, 109, 11996-12002, 2005.
  113. A. Bateni, S.S. Susnar, A. Amirfazli, A.W. Neumann, “A Novel Methodology to Study Shape and Surface Tension of Drops in Electric Fields”, Microgravity Sci. Technol. J., 16, 153-157, 2005.
  114. D. Benfield, D.D. Otto, K.M. Bagnall, V.J. Raso, W. Moussa, A. Amirfazli, “Stiffness Characteristics of Hamstring Tendon Graft Fixation Methods at the Femoral Site”, Int. Orthopedics, 29, 35-38, 2005.
  115. J. Ally, B. Martin, Mir B. Khamesee, W. Roa, A. Amirfazli, “Magnetic Targeting of Aerosol Particles for Cancer Therapy”, J. Magn. Magn. Mater., 293, 442-449, 2005.
  116. M. Hoorfar, A. Amirfazli, J. Gaydos, and A.W. Neumann, “Measurement of Line Tension from Shape of Menisci near Stripwise Heterogeneous Walls”, Adv. Colloid Interface Sci., 114, 103-118, 2005.
  117. A.G. Au, A.B. Liggins, V.J. Raso, A. Amirfazli, “A parametric analysis of fixation post shape in tibial knee prostheses”, Biomed. Eng. Phys., 27, 123-134, 2005.
  118. A. Bateni, S. Laughton, H. Tavana, S.S. Susnar, A. Amirfazli, A.W. Neumann, “Effect of Electric Fields on Contact Angle and Surface Tension of Drops”, J. Colloid Interface Sci., 283, 215-222, 2005.
  119. A.G. Au, V. J. Raso, A. B. Liggins, D. D. Otto, A. Amirfazli “A Three-Dimensional Finite Element Stress Analysis for Tunnel Placement and Buttons in Anterior Cruciate Ligament Reconstructions”, J. Biomech. 38, 827–832, 2005.
  120. A.G. Au, D.D. Otto, V. J. Raso, and A. Amirfazli, “Investigation of a Hybrid Method of Soft Tissue Graft Fixation for Anterior Cruciate Ligament Reconstruction”, Knee, 12, 149-153, 2005.
  121. A. Bateni, S.S. Susnar, A. Amirfazli, A.W. Neumann, “Development of a New Methodology to Study Drop Shape and Surface Tension in Electric Fields”, Langmuir 20, 7589-7597, 2004.
  122. A. Amirfazli, “On Thermodynamics of Thin Films: the Mechanical Equilibrium Condition and Contact Angles”, J. Adhesion, 80, 1003-1016, 2004.
  123. R. Mohammadi,  J. Wassink, A. Amirfazli, “Effect of Surfactants on wetting of Super-Hydrophobic Surfaces”, Langmuir, 20, 9657-9662, 2004.
  124.  A. Amirfazli, A.W. Neumann, “Status of the Three-Phase Line Tension: a Review”, Adv. Colloid Interface Sci., 110, 121-141, 2004. TOP25 Hottest articles
  125. R. Mohamadi, A. Amirfazli, “Contact Angle Measurement for Dispersed Microspheres Using Scanning Confocal Microscopy”, J. Dispersion Sci. Tech., 25, 567-574, 2004.
  126. M.R. Shadnam, S. Kirkwood, R. Fedosejevs, and A. Amirfazli, “Direct Patterning of Self Assembled Monolayers on Gold Using a Laser Beam”, Langmuir, 20, 2667-2676, 2004.
  127. M.R. Shadnam, and A. Amirfazli, “Mechanical Equilibrium Condition for Multi-Phase Contact Lines and Multi-Phase Contact Points”, Langmuir, 19, 4658-4665, 2003.
  128. A. Amirfazli, A. Keshavarz, , L. Zhoung, and A.W. Neumann, “An Experimental Study of Low Contact Angles: Drop Size Dependence and Line Tension”, J. Colloid Interface Sci., 265, 152-160, 2003.
  129. A. Bateni, S.S. Susnar, A. Amirfazli, A.W. Neumann, “A High-Accuracy Polynomial Fitting Approach to Determine Contact Angles”, Colloids Surfaces A, 219, 215-231, 2002.
  130. A. Amirfazli, S. Hanig, A. Muller, A.W. Neumann, “Measurements of Line Tension for Solid-Liquid-Vapor Systems Using Drop Size Dependence of Contact angles and its Correlation with Solid-Liquid Interfacial Tension”, Langmuir, 16, p. 2024, 2000.
  131. A. Amirfazli, J. Graham-Eagle, S. Pennell, and A.W. Neumann, “Implementation and Examination of a New Drop Shape Analysis Algorithm to Measure Contact Angles and Surface Tension from the Diameters of Two Sessile Drops”, Colloids Surfaces A, 161, p. 63, 2000.
  132. J.M. Alvarez, A. Amirfazli, and A.W. Neumann, “Automation of the Axisymmetric Drop Shape Analysis-Diameter (ADSA-D) for Contact Angle Measurements”, Colloids Surfaces A, 156, p. 163, 1999.
  133. A. Amirfazli, D.Y. Kwok, J. Gaydos, and A.W. Neumann, “Line Tension Measurements Through Drop Size Dependence of Contact Angles”, J. Colloid Interface Sci., 205, p.1, 1998.
  134. A. Amirfazli, D. Chatain, and A.W. Neumann, “Drop Size Dependence of Contact Angles for Liquid Tin on Silica Surface: Line Tension and its Correlation with Liquid-Solid Interfacial Tension”, Colloids Surfaces A, 142, p.183, 1998.
  135. P. Chen, S.S. Susnar, A. Amirfazli, C. Mak, A.W. Neumann, “Line Tension Measurements: An Application of the Quadrilateral Relation to a Liquid Lens System”, Langmuir, 13, p. 3035, 1997.
  136. P. Chen, S.S. Susnar, C. Mak, A. Amirfazli, and A.W. Neumann, “Lens Size Dependence of Contact Angles and the Line Tension of the Dodecane-Water-Air System”, Colloids Surfaces A, 129-130, p. 45, 1997.